nxt-test - Test the NXT-Python setup

       This program is part of NXT-Python which is currently maintained by Nicolas Schodet.

       Those options are common to programs using NXT-Python.

       --backendNAME
              Enable  given  backend.  Can  be  used  several  times  to  enable  several backends.  One of usb,
              bluetooth, socket or devfile.

       --configNAME
              Name of configuration file section to use.

       --config-filenamePATH
              Path to configuration file. Can be used several times to use several configuration files.

       --nameNAME
              Name of NXT brick (for example: NXT). Useful to  find  the  right  brick  if  several  bricks  are
              connected.

       --hostADDRESS
              Bluetooth address of the NXT brick (for example: 00:16:53:01:02:03).

       --server-hostHOST
              Server address or name to connect to when using socket backend.

       --server-portPORT
              Server port to connect to when using socket backend.

       --filenameFILENAME
              Device filename (for example: /dev/rfcomm0), when using ~nxt.backend.devfile backend.

       See nxt-python.conf(5) documentation for better explanation of the options to find the NXT brick.

       2021-2025, Nicolas Schodet

3.5.1                                             Jan 12, 2025                                       NXT-TEST(1)

nxt-test tests connection with a NXT brick. It allows one to debug the NXT-Python setup.

       The NXT brick can be connected using USB, Bluetooth or over the network.

       Running for a NXT brick connected using USB:

          $ nxt-test
          Finding brick...
          NXT brick name: NXT
          Host address: 00:16:53:01:02:03
          Bluetooth signal strengths: (0, 0, 0, 0)
          Free user flash: 48480
          Protocol version 1.124
          Firmware version 1.29
          Battery level 8433 mV
          Play test sound...done

       To report problems, please enable debug logs:

          $ nxt-test --log-level DEBUG

       When debugging Bluetooth connection problems, try to give the address explicitly:

          $ nxt-test --log-level DEBUG --host 00:16:53:01:02:03

       The  address can be found in the “Settings” menu, under “NXT Version” screen, it is the last line labeled
       “ID”. Add the colon to separate each pair of digits.

       nxt-test - Test the NXT-Python setup

--no-sound
              Be quiet, disable the sound test.

       --log-levelLEVEL
              Set the log level. One of DEBUG, INFO, WARNING, ERROR, or CRITICAL. Messages whose level is  below
              the current log level will not be displayed.

nxt-python.conf(5)

       NXT-Python documentation <https://ni.srht.site/nxt-python/latest/>

nxt-test   [–backendNAME]   [–configNAME]  [–config-filenamePATH]  [–nameNAME]  [–hostADDRESS]
       [–server-hostHOST] [–server-portPORT] [–filenameFILENAME] [–no-sound] [–log-levelLEVEL]