Eclipse SUMO marouter Version 1.18.0
Copyright (C) 2001-2023 German Aerospace Center (DLR) and others; https://sumo.dlr.de
Import O/D-matrices for macroscopic traffic assignment to generate SUMO routes.
ConfigurationOptions:-c, --configuration-file FILE
Loads the named config on startup
-C, --save-configuration FILE
Saves current configuration into FILE
--save-configuration.relative
Enforce relative paths when saving the configuration
--save-template FILE
Saves a configuration template (empty) into FILE
--save-schema FILE
Saves the configuration schema into FILE
--save-commented
Adds comments to saved template, configuration, or schema
InputOptions:-n, --net-file FILE
Use FILE as SUMO-network to route on
-a, --additional-files FILE
Read additional network data (districts, bus stops) from FILE(s)
-r, --route-files FILE
Read sumo routes, alternatives, flows, and trips from FILE(s)
--phemlight-path FILE
Determines where to load PHEMlight definitions from
--phemlight-year INT
Enable fleet age modelling with the given reference year in PHEMlight5
--phemlight-temperature FLOAT
Set ambient temperature to correct NOx emissions in PHEMlight5
-w, --weight-files FILE
Read network weights from FILE(s)
--lane-weight-files FILE
Read lane-based network weights from FILE(s)
-x, --weight-attribute STR
Name of the xml attribute which gives the edge weight
--junction-taz
Initialize a TAZ for every junction to use attributes toJunction and fromJunction
-m, --od-matrix-files FILE
Loads O/D-files from FILE(s)
--od-amitran-files FILE
Loads O/D-matrix in Amitran format from FILE(s)
-z, --tazrelation-files FILE
Loads O/D-matrix in tazRelation format from FILE(s)
--tazrelation-attribute STR
Define data attribute for loading counts (default 'count')
--weight-adaption FLOAT
The travel time influence of prior intervals
--taz-param STR[]
Parameter key(s) defining source (and sink) taz
--ignore-taz
Ignore attributes 'fromTaz' and 'toTaz'
OutputOptions:-o, --output-file FILE
Write generated routes to FILE
--vtype-output FILE
Write used vehicle types into separate FILE
--keep-vtype-distributions
Keep vTypeDistribution ids when writing vehicles and their types
--emissions.volumetric-fuel
Return fuel consumption values in (legacy) unit l instead of mg
--named-routes
Write vehicles that reference routes by their id
--write-license
Include license info into every output file
--output-prefix STR
Prefix which is applied to all output files. The special string 'TIME' is replaced by the current
time.
--precision INT
Defines the number of digits after the comma for floating point output
--precision.geo INT
Defines the number of digits after the comma for lon,lat output
-H, --human-readable-time
Write time values as hour:minute:second or day:hour:minute:second rather than seconds
--ignore-vehicle-type
Does not save vtype information
--netload-output FILE
Writes edge loads and final costs into FILE
--all-pairs-output FILE
Writes complete distance matrix into FILE
--exit-times
Write exit times (weights) for each edge
ProcessingOptions:--max-alternatives INT
Prune the number of alternatives to INT
--with-taz
Use origin and destination zones (districts) for in- and output
--routing-threads INT
The number of parallel execution threads used for routing
--routing-algorithm STR
Select among routing algorithms ['dijkstra', 'astar', 'CH', 'CHWrapper']
--restriction-params STR[]
Comma separated list of param keys to compare for additional restrictions
--weights.interpolate
Interpolate edge weights at interval boundaries
--weights.expand
Expand the end of the last loaded weight interval to infinity
--weights.minor-penalty FLOAT
Apply the given time penalty when computing routing costs for minor-link internal lanes
--aggregation-interval TIME
Defines the time interval when aggregating single vehicle input; Defaults to one hour
--capacities.default
Ignore edge priorities when calculating capacities and restraints
--weights.priority-factor FLOAT
Consider edge priorities in addition to travel times, weighted by factor
--bulk-routing.vtypes
Aggregate routing queries with the same origin for different vehicle types
--weight-period TIME
Aggregation period for the given weight files; triggers rebuilding of Contraction Hierarchy
-s, --scale FLOAT
Scales the loaded flows by FLOAT
--vtype STR
Defines the name of the vehicle type to use
--prefix STR
Defines the prefix for vehicle flow names
--timeline STR[]
Uses STR[] as a timeline definition
--timeline.day-in-hours
Uses STR as a 24h-timeline definition
--additive-traffic
Keep traffic flows of all time slots in the net
--assignment-method STR
Choose a assignment method: incremental, UE or SUE
--tolerance FLOAT
Use FLOAT as tolerance when checking for SUE stability
--left-turn-penalty FLOAT
Use left-turn penalty FLOAT to calculate link travel time when searching routes
--paths INT
Use INTEGER as the number of paths needed to be searched for each OD pair at each iteration
--paths.penalty FLOAT
Penalize existing routes with FLOAT to find secondary routes
--upperbound FLOAT
Use FLOAT as the upper bound to determine auxiliary link cost
--lowerbound FLOAT
Use FLOAT as the lower bound to determine auxiliary link cost
-i, --max-iterations INT
maximal number of iterations for new route searching in incremental and stochastic user assignment
--max-inner-iterations INT
maximal number of inner iterations for user equilibrium calculation in the stochastic user
assignment
--route-choice-method STR
Choose a route choice method: gawron, logit, or lohse
--gawron.beta FLOAT
Use FLOAT as Gawron's beta
--gawron.a FLOAT
Use FLOAT as Gawron's a
--keep-all-routes
Save routes with near zero probability
--skip-new-routes
Only reuse routes from input, do not calculate new ones
--logit.beta FLOAT
Use FLOAT as (c-)logit's beta for the commonality factor
--logit.gamma FLOAT
Use FLOAT as (c-)logit's gamma for the commonality factor
--logit.theta FLOAT
Use FLOAT as (c-)logit's theta
DefaultsOptions:--flow-output.departlane STR
Assigns a default depart lane
--flow-output.departpos STR
Assigns a default depart position
--flow-output.departspeed STR
Assigns a default depart speed
--flow-output.arrivallane STR
Assigns a default arrival lane
--flow-output.arrivalpos STR
Assigns a default arrival position
--flow-output.arrivalspeed STR
Assigns a default arrival speed
TimeOptions:-b, --begin TIME
Defines the begin time; Previous trips will be discarded
-e, --end TIME
Defines the end time; Later trips will be discarded; Defaults to the maximum time that SUMO can
represent
ReportOptions:-v, --verbose
Switches to verbose output
--print-options
Prints option values before processing
-?, --help
Prints this screen or selected topics
-V, --version
Prints the current version
-X, --xml-validation STR
Set schema validation scheme of XML inputs ("never", "local", "auto" or "always")
--xml-validation.net STR
Set schema validation scheme of SUMO network inputs ("never", "local", "auto" or "always")
--xml-validation.routes STR
Set schema validation scheme of SUMO route inputs ("never", "local", "auto" or "always")
-W, --no-warnings
Disables output of warnings
--aggregate-warnings INT
Aggregate warnings of the same type whenever more than INT occur
-l, --log FILE
Writes all messages to FILE (implies verbose)
--message-log FILE
Writes all non-error messages to FILE (implies verbose)
--error-log FILE
Writes all warnings and errors to FILE
--language STR
Language to use in messages
--ignore-errors
Continue if a route could not be build
--stats-period INT
Defines how often statistics shall be printed
--no-step-log
Disable console output of route parsing step
RandomNumberOptions:--random
Initialises the random number generator with the current system time
--seed INT
Initialises the random number generator with the given value
Install Now
PNG Icons
