Usage:
mbimcli [OPTION?] - Control MBIM devices
HelpOptions:-h, --help
Show help options
--help-all
Show all help options
--help-basic-connect
Show Basic Connect Service options
--help-phonebook
Show Phonebook Service options
--help-dss
Show Device Service Stream options
--help-ms-firmware-id
Show Microsoft Firmware ID Service options
--help-ms-host-shutdown
Show Microsoft Host Shutdown Service options
--help-ms-sar
Show Microsoft SAR Service options
--help-atds
Show AT&T Device Service options
--help-intel-firmware-update
Show Intel Firmware Update Service options
--help-ms-basic-connect-extensions
Show Microsoft Basic Connect Extensions Service options
--help-quectel
Show Quectel Service options
--help-link-management
Show link management specific options
--help-intel-thermal-rf
Show Intel Thermal RF Service options
--help-ms-voice-extensions
Show Microsoft Voice Extensions Service options
--help-ms-uicc-low-level-access
Show Microsoft UICC Low Level Access Service options
--help-intel-mutual-authentication
Show Intel mutual authentication Service options
--help-intel-tools
Show Intel 5G tools options
--help-google
Show Google Service options
--help-fibocom
Show Fibocom Service options
--help-sms
Show SMS service options
--help-compal
Show Compal Service options
BasicConnectoptions:--query-device-caps
Query device capabilities
--query-subscriber-ready-status
Query subscriber ready status
--query-radio-state
Query radio state
--set-radio-state=[(on|off)]
Set radio state
--query-device-services
Query device services
--query-pin-state
Query PIN state
--enter-pin=[(PIN type),(current PIN)]
Enter PIN (PIN type is optional, defaults to PIN1, allowed options:
(pin1,network-pin,network-subset-pin,service-provider-pin,corporate-pin)
--change-pin=[(current PIN),(new PIN)]
Change PIN
--enable-pin=[(current PIN)]
Enable PIN
--disable-pin=[(PIN type),(current PIN)]
Disable PIN (PIN type is optional, see enter-pin for details)
--enter-puk=[(PUK type),(PUK),(new PIN)]
Enter PUK (PUK type is optional, defaults to PUK1, allowed options:
(puk1,network-puk,network-subset-puk,service-provider-puk,corporate-puk)
--query-pin-list
Query PIN list
--query-home-provider
Query home provider
--query-preferred-providers
Query preferred providers
--query-visible-providers
Query visible providers
--query-registration-state
Query registration state
--register-automatic
Launch automatic registration
--query-signal-state
Query signal state
--query-packet-service-state
Query packet service state
--attach-packet-service
Attach to the packet service
--detach-packet-service
Detach from the packet service
--query-connection-state=[SessionID]
Query connection state (SessionID is optional, defaults to 0)
--connect=["key=value,..."]
Connect (allowed keys: session-id, access-string, ip-type, auth, username, password, compression,
context-type)
--query-ip-configuration=[SessionID]
Query IP configuration (SessionID is optional, defaults to 0)
--disconnect=[SessionID]
Disconnect (SessionID is optional, defaults to 0)
--query-packet-statistics
Query packet statistics
--query-ip-packet-filters=[SessionID]
Query IP packet filters (SessionID is optional, defaults to 0)
--set-ip-packet-filters=["key=value,..."]
Set IP packet filters (allowed keys: session-id, packet-filter, packet-mask, filter-id)
--query-provisioned-contexts
Query provisioned contexts
--set-provisioned-contexts=["key=value,..."]
Set provisioned contexts (allowed keys: context-id, context-type, auth, compression, username,
password, access-string, provider-id)
--set-signal-state=["key=value,..."]
Set signal state (allowed keys: signal-strength-interval, rssi-threshold, error-rate-threshold)
--set-network-idle-hint=[(enabled|disabled)]
Set network idle hint
--query-network-idle-hint
Query network idle hint
--set-emergency-mode=[(on|off)]
Set emergency mode
--query-emergency-mode
Query emergency mode
--set-service-activation=[Data]
Set service activation
Phonebookoptions:--phonebook-query-configuration
Query the phonebook configuration
--phonebook-read=[(Phonebook index)]
Read phonebook entry with given index
--phonebook-read-all
Read all phonebook entries
--phonebook-write=[(Name),(Number)[,(Index)]]
Add new phonebook entry or update an existing one
--phonebook-delete=[(Phonebook index)]
Delete phonebook entry with given index
--phonebook-delete-all
Delete all phonebook entries
DeviceServiceStreamoptions:--dss-connect=[(UUID),(Session ID)]
Connect DSS session
--dss-disconnect=[(UUID),(Session ID)]
Disconnect DSS session
MicrosoftFirmwareIDoptions:--ms-query-firmware-id
Query firmware ID
MicrosoftHostShutdownoptions:--ms-notify-host-shutdown
Notify that host is shutting down
MicrosoftSARoptions:--ms-set-sar-config=[(device|os),(enabled|disabled)[,[{antenna_index,backoff_index}...]]]
Set SAR config
--ms-query-sar-config
Query SAR config
--ms-set-transmission-status=[(enabled|disabled),(timer)]
Set transmission status and hysteresis timer (in seconds)
--ms-query-transmission-status
Query transmission status
AT&TDeviceServiceoptions:--atds-query-signal
Query signal info
--atds-query-location
Query cell location
IntelFirmwareUpdateServiceoptions:--intel-modem-reboot=[(Boot Mode),(Timeout)]
Reboot modem. Boot mode and timeout arguments only required if MBIMEx >= 2.0.
MicrosoftBasicConnectExtensionsoptions:--ms-query-pco=[SessionID]
Query PCO value (SessionID is optional, defaults to 0)
--ms-query-lte-attach-configuration
Query LTE attach configuration
--ms-query-lte-attach-info
Query LTE attach status information
--ms-query-sys-caps
Query system capabilities
--ms-query-device-caps
Query device capabilities
--ms-query-slot-info-status=[SlotIndex]
Query slot information status
--ms-set-device-slot-mappings=[(SlotIndex)[,(SlotIndex)[,...]]]
Set device slot mappings for each executor
--ms-query-device-slot-mappings
Query device slot mappings
--ms-query-location-info-status
Query location info status
--ms-set-provisioned-contexts=["key=value,..."]
Set provisioned contexts (allowed keys: operation, context-type, ip-type, state, roaming-control,
media-type, source, auth, compression, username, password, access-string)
--ms-query-provisioned-contexts
Query provisioned contexts
--ms-query-base-stations-info
Query base stations info
--ms-device-reset
Reset device
--ms-query-version=[(MBIM version),(MBIM extended version)]
Exchange supported version information. Since MBIMEx v2.0.
--ms-query-registration-parameters
Query registration parameters. Since MBIMEx v3.0.
--ms-set-registration-parameters=["key=value,..."]
Set registration parameters (required keys: mico-mode, drx-cycle, ladn-info,
default-pdu-activation-hint, re-register-if-needed). Since MBIMEx v3.0.
--ms-query-modem-configuration
Query modem configuration. Since MBIMEx v3.0.
--ms-query-wake-reason
Query wake reason. Since MBIMEx v3.0.
Quecteloptions:--quectel-query-radio-state
Query radio state
--quectel-set-radio-state=[(on)]
Set radio state
Linkmanagementoptions:--link-list=[IFACE]
List links created from a given interface
--link-add=[iface=IFACE,prefix=PREFIX[,session-id=N]]
Create new network interface link
--link-delete=IFACE
Delete a given network interface link
--link-delete-all=[IFACE]
Delete all network interface links from the given interface
IntelThermalRFServiceoptions:--intel-query-rfim
Query RFIM frequency information
--intel-set-rfim=[(on|off)]
Enable or disable RFIM (disabled by default)
MicrosoftVoiceExtensionsServiceoptions:--ms-query-nitz
Query network identity and time zone
MicrosoftUICCLowLevelAccessServiceoptions:--ms-query-uicc-application-list
Query UICC application list
--ms-query-uicc-file-status=["key=value,..."]
Query UICC file status (allowed keys: application-id, file-path)
--ms-query-uicc-read-binary=["key=value,..."]
Read UICC binary file (allowed keys: application-id, file-path, read-offset, read-size, local-pin
and data)
--ms-query-uicc-read-record=["key=value,..."]
Read UICC record file (allowed keys: application-id, file-path, record-number, local-pin and data)
--ms-set-uicc-open-channel=["key=value,..."]
Set UICC open channel (allowed keys: application-id, selectp2arg, channel-group)
--ms-set-uicc-close-channel=["key=value,..."]
Set UICC close channel (allowed keys: channel, channel-group)
--ms-query-uicc-atr
Query UICC atr
--ms-set-uicc-apdu=["key=value,..."]
Set UICC apdu (allowed keys: channel, secure-message, classbyte-type, command)
--ms-set-uicc-reset=[(Pass Through Action)]
Set UICC reset
--ms-query-uicc-reset
Query UICC reset
--ms-set-uicc-terminal-capability=["key=value,..."]
Set UICC terminal capability (allowed keys: terminal-capability)
--ms-query-uicc-terminal-capability
Query UICC terminal capability
IntelmutualauthenticationServiceoptions:--intel-query-fcc-lock
Query FCC lock information
--intel-set-fcc-lock=[(ResponsePresent),(Response)]
Set FCC lock information
Intel 5G tools options
--intel-set-trace-config=[(TraceCmd)|(TraceValue)]
Set trace configuration
--intel-query-trace-config=[(TraceCmd)]
Query trace configuration
Googleoptions:--google-set-carrier-lock=[(Data)]
Set Google Carrier Lock
--google-query-carrier-lock
Query Google Carrier Lock
FIbocomoptions:--fibocom-set-at-command="<AT command>"
send AT command to modem, and receive AT response
Simplemessageserviceoptions:--sms-delete=[(all|new|old|sent|draft|index=N)]
Delete all SMS matching a given filter
--sms-read=[(all|new|old|sent|draft|index=N)]
Read all SMS matching a given filter
Compaloptions:--compal-query-at-command="<AT command>"
send AT command to modem, and receive AT response
ApplicationOptions:-d, --device=[PATH]
Specify device path
-p, --device-open-proxy
Request to use the 'mbim-proxy' proxy
--device-open-ms-mbimex-v2
Request to enable Microsoft MBIMEx v2.0 support
--device-open-ms-mbimex-v3
Request to enable Microsoft MBIMEx v3.0 support
--no-open=[Transaction ID]
Do not explicitly open the MBIM device before running the command
--no-close
Do not close the MBIM device after running the command
--noop Don't run any command
-v, --verbose
Run action with verbose logs, including the debug ones
--verbose-full
Run action with verbose logs, including the debug ones and personal info
--silent
Run action with no logs; not even the error/warning ones
--printable=[(Data)]
Get the printable info of the given hex encoded MBIM message
-V, --version
Print version
Install Now
PNG Icons
