mingle - fast edge bundling

       Emden R. Gansner <erg@graphviz.org>, Yifan Hu <yifanhu@yahoo.com>

       At  present, mingle does not handle graphs with loops or directed multiedges. So, a graph with edges a->b and b->a is acceptable, but not if it has edges a->b and a->b or a--b and a--b.

mingle  takes  as  input  a  graph  in  DOT format with node position information (the pos attribute) and
       bundles the edges.

       mingle - fast edge bundling

       The following options are supported:

       -mk   indicates which method to use for bundling. A value of 0 corresponds to a force-directed bundling.
              A value of 2 uses a cluster plus  ink  saving  approach.  If  available,  a  value  1  denotes  an
              agglomerative ink saving method. Normally, the last is the default.

       -ak   specifies  the  maximum  turning angle, in degrees, as a non-negative real.  The larger the value,
              the more edges may bend. If the value is 0, there is no  limitation  on  the  turning  angle.  The
              default is 40.  The parameter is not used in force-directed bundling.

       -cv   specifies  which  compatability  measure to use. The value 0, the default, uses a distance metric,
              while a value of 1 relies on full  compatability.  This  value  is  only  used  in  force-directed
              bundling.

       -ik   gives  the  maximum number of iterative divisions of edges allowd in force-directed bundling.  The
              default is 4.

       -kk   gives the number of neighbors to be used in forming a nearest neighbor graph.  This  parameter  is
              only used in the agglomerative method. The default is 10.

       -Kk   is  a  positive  real value giving the force constant used in force-directed bundling. By default,
              the value is determined automatically.

       -ofile
              puts output in file. Default output is stdout

       -pk   Except for the force-directed method, bundling minimizes $ink * (k  -  cos(turning  angle))$.  The
              larger  the  value  of k, the less emphasis is put on avoiding sharp turning angles and the faster
              the bundling.  The default value is -1.

       -rk   is a non-negative integer giving the maximum recursion level used in the agglomerative method. The
              default is 100.

       -Tfmt specifies the output format. At present, the output is  always  in  the  DOT  format.  If  fmt  is
              "simple", the output is a simple, schematic representation of the drawing. Only the node positions
              and  edges  are  retained  from  the  original  graph.  If fmt is "gv", the drawing information is
              attached to the input graph.

       -vk   determines the verbose level used for tracing the algorithm. The  value  k  is  optional;  if  not
              provided, the value 1 is used.

       -?     Print usage and exit.

sfdp(1), neato(1), gvpr(1)

       Emden R. Gansner, Yifan Hu, Stephen C. North and  Carlos  Scheidegger,  ``Multilevel  Agglomerative  Edge
       Bundling  for  Visualizing  Large Graphs'', IEEE Pacific Visualization Symposium PacificVis, pp. 187‐194,
       2011.

                                                 16 August 2013                                        MINGLE(1)

mingle [ options ] [ -ooutfile ] [ files ]