nvme-nvm-id-ctrl - Send NVMe Identify Controller, return NVM command set structure

       For the NVMe device given, sends the NVM command set’s identify controller command and provides the
       result and returned structure.

       The <device> parameter is mandatory and may be either the NVMe character device (ex: /dev/nvme0), or a
       namespace block device (ex: /dev/nvme0n1).

       On success, the data structure returned by the device will be decoded and displayed in one of several
       ways.

       •   Has the program interpret the returned buffer and display the known fields in a human readable
           format:

               # nvme nvm-id-ctrl /dev/nvme0

       •   Show the output in json format

               # nvme nvm-id-ctrl /dev/nvme0 -o json

       nvme-nvm-id-ctrl - Send NVMe Identify Controller, return NVM command set structure

       Part of nvme-cli

NVMe                                               02/16/2025                                NVME-NVM-ID-CTRL(1)

       -o <fmt>, --output-format=<fmt>
           Set the reporting format to normal, json or binary. Only one output format can be used at a time.

       -v, --verbose
           Increase the information detail in the output.

nvmenvm-id-ctrl <device> [--output-format=<fmt> | -o <fmt>] [--verbose | -v]