qmi-network - Simple network management of QMI devices

       Copyright   ©   2013-2021   Aleksander   Morgado   License   GPLv2+:   GNU   GPL   version   2  or  later
       <http://gnu.org/licenses/gpl-2.0.html>
       This is free software: you are free to change and redistribute it.  There is NO WARRANTY, to  the  extent
       permitted by law.

       Simple network management of QMI devices

   Commands:
       start  Start network connection

       stop   Stop network connection

       status Query network connection status

       qmi-network - Simple network management of QMI devices

--profile=[PATH]
              Use the profile in the specified path

       --help Show help options

       --version
              Show version

       Notes:

              1) [DEVICE] is given as the full path to the cdc-wdm character device, e.g.:

              /dev/cdc-wdm0

              2)  The  qmi-network  script  requires  a  profile  to  work.  Unless  explicitly  specified  with
              `--profile', the file is assumed to be available in the following path:

              /etc/qmi-network.conf

              3) The APN to use should be configured in the profile, in the following way (e.g. assuming APN  is
              called 'internet'):

              APN=internet

              4) Optional APN user/password strings may be given in the following way:

              APN_USER=user APN_PASS=password

              5) Optional IP_TYPE strings may be given in the following way:

              IP_TYPE=[4|6]

              6)  If  you  want  to instruct the qmi-network script to use the qmi-proxy setup, you can do so by
              configuring the following line in the profile:

              PROXY=yes

              7) To instruct the qmi-network script to use an already existing Profile ID, or to  create  a  new
              one on the fly, use the following configuration in the profile:

       PROFILE=number
              # to use the profile-id number

       PROFILE=auto
              # to create a temporary profile on the fly

              8) Once the qmi-network script reports a successful connection you still need to run a DHCP client
              on the associated WWAN network interface.

       The  full  documentation  for qmi-network is maintained as a Texinfo manual.  If the info and qmi-network
       programs are properly installed at your site, the command

              infoqmi-network

       should give you access to the complete manual.

qmi-network 1.35.6                               September 2024                                   QMI-NETWORK(1)

qmi-network [OPTIONS] [DEVICE] [COMMAND]