rtl_biast - a tool for turning the RTL-SDR.com bias tee or any GPIO ON and OFF.

       This manual page was written by Maitland Bottoms for the Debian project (but may be used by others).

       Copyright (c) 2020 A. Maitland Bottoms <bottoms@debian.org>

       This  program  is  free  software:  you  can  redistribute it and/or modify it under the terms of the GNU
       General Public License as published by the Free Software Foundation, either version 2 of the License,  or
       (at your option) any later version.

       This  program  is  distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even
       the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General  Public
       License for more details.

RTL-SDR                                               0.6.0                                         rtl_biast(1)

       Uses  a  re-purposed  DVB-T  receiver  as  a  software defined radio to receive and send I/Q data via TCP
       network to another demodulation, decoding or logging apllication. Written for and incorporated  into  the
       osmocom rtl-sdr project.

       Much software is available for the RTL2832. Most of the user-level packages rely on the librtlsdr library
       which  comes  as  part of the rtl-sdr codebase. This codebase contains both the library itself and also a
       number of command line tools such as rtl_test, rtl_sdr, rtl_tcp, and rtl_fm. These command line tools use
       the library to test for the existence of RTL2832 devices and to perform basic data transfer functions  to
       and from the device.

       Because  most of the RTL2832 devices are connected using USB, the librtlsdr library depends on the libusb
       library to communicate with the device.

       rtl_biast - a tool for turning the RTL-SDR.com bias tee or any GPIO ON and OFF.

       -d device_index (default: 0)

       -b bias_on (default: 0)

       -g GPIO select (default: 0)

gnuradio(1)

       RTL-SDR wiki documentation: http://sdr.osmocom.org/trac/wiki/rtl-sdr

       Other rtl-sdr programs:

       rtl_adsb(1), rtl_eeprom(1), rtl_fm(1), rtl_sdr(1), rtl_test(1)

rtl_biast[OPTIONS]

       Run this program on a machine with an rtl-sdr supported device connected and it will provide I/Q data  to
       other applications via TCP/IP.