-a--addfilenames-or-URLs
Add torrents to transmission.
-b--debug
Enable debugging mode.
-as--alt-speed
Use the alternate Limits.
-AS--no-alt-speed
Don't use the alternate Limits.
-asd--alt-speed-downlimitlimit
Limit the alternate download speed to limit kilobytes per second.
-asu--alt-speed-uplimitlimit
Limit the alternate upload speed to limit kilobytes per second.
-asc--alt-speed-scheduler
Use the scheduled on/off times.
-ASC--no-alt-speed-scheduler
Don't use the scheduled on/off days and times.
--alt-speed-time-begintimeTime to start using the alt speed limits (in hhmm).
--alt-speed-time-endtimeTime to stop using the alt speed limits (in hhmm).
--alt-speed-daysdays
Set the number of days on which to enable the speed scheduler, using a list such as "2,4-6".
--torrent-done-scriptfilename
Specify a file to run each time a torrent finishes
--no-torrent-done-script
Don't run any script when a torrent finishes
-c--incomplete-dirdir
When adding new torrents, store their contents in directory until the torrent is done.
-C--no-incomplete-dir
Don't store incomplete torrents in a different directory.
-d--downlimitlimit
Limit the maximum download speed to limit kB/s. If current torrent(s) are selected this operates
on them. Otherwise, it changes the global setting.
-D--no-downlimit
Disable download speed limits. If current torrent(s) are selected this operates on them.
Otherwise, it changes the global setting.
-e--cachesize
Set the session's maximum memory cache size in MiB. This cache is used to reduce disk IO.
-er--encryption-required
Encrypt all peer connections.
-ep--encryption-preferred
Prefer encrypted peer connections.
-et--encryption-tolerated
Prefer unencrypted peer connections.
--exit Tell the Transmission to initiate a shutdown.
-f--files
Get a file list for the current torrent(s)
-g--getall | file-index | files
Mark file(s) for download. all marks all all of the torrent's files for downloading, file-index
adds a single file to the download list, and files adds multiple files to the download list, such
as "-g1,3-5" to add files #1, #3, #4, and #5 to the download list.
-F--filterfilter
Filter selected torrents. Further commands will use only torrents that satisfy the filter
condition.
i - currently idle
u - currently uploading
d - currently downloading
n:str - torrent name includes str
l:label - has label
r:ratio - Minimum upload ratio
w - Have some unwanted files
Prefixing the filter by "~" negates the filter. -F may be specified more than once, and may be
preceded by -t. Only torrents that satisfy all the conditions are selected.
-G--no-getall | file-index | files
Mark file(s) for not downloading.
-gsr--global-seedratioratio
All torrents, unless overridden by a per-torrent setting, should seed until a specific ratio-GSR--no-global-seedratio
All torrents, unless overridden by a per-torrent setting, should seed regardless of ratio
-h--help
Print command-line option descriptions.
-i--info
Show details of the current torrent(s)
-if--info-files
List the specified torrent's files
-ip--info-peers
List the specified torrent's peers
-ic--info-pieces
List the specified torrent's pieces
-it--info-trackers
List the specified torrent's trackers
-j--json
Return the RPC response as JSON
-si--session-info
List session information from the server
-st--session-stats
List statistical information from the server
-l--list
List all torrents
-ids--print-ids
Print a list of the specified torrent's ids in a format suitable as a parameter for -t-L--labelslabel1[,label2[,...]]
Set the specified torrent's labels
-m--portmap
Enable portmapping via NAT-PMP or UPnP
-M--no-portmap
Disable portmapping
-n--authusername:password
Set the username and password for authentication
-ne--authenv
Set the authentication information from the TR_AUTH environment variable which must be formatted
as username:password.-N--netrcfilename
Set the authentication information from a netrcfile. See netrc(5) for more information.
-o--dht
Enable distributed hash table (DHT).
-O--no-dht
Disable distributed hash table (DHT).
-p--portport
Set the port for use when listening for incoming peer connections
-Bh--bandwidth-high
Give this torrent first chance at available bandwidth
-Bn--bandwidth-normal
Give this torrent the bandwidth left over by high priority torrents
-Bl--bandwidth-low
Give this torrent the bandwidth left over by high and normal priority torrents
-ph--priority-highall | file-index | files
Try to download the specified file(s) first. all marks all of the torrent's files as normal
priority, file-index sets a single file's priority as normal, and files sets multiple files'
priorities as normal, such as "-pn1,3-5" to normalize files #1, #3, #4, and #5.
-pn--priority-normalall | file-index | files
Try to download the specified files normally.
-pl--priority-lowall | file-index | files
Try to download the specified files last
-pr--peersnumber
Set the maximum number of peers. If current torrent(s) are selected this operates on them.
Otherwise, it changes the global setting.
-r--remove
Remove the current torrent(s). This does not delete the downloaded data.
-rad--remove-and-delete
Remove the current torrent(s) and delete their downloaded data.
--reannounce
Reannounce the current torrent(s). This is the same as the GUI's "ask tracker for more peers"
button.
--move Move the current torrents' data from their current locations to the specified directory.
--renamenewname
Rename files or root folder of a torrent
--patholdname
Provide original path for the rename command
--unix-socket
Connect using a Unix domain socket.
--find Tell Transmission where to look for the current torrents' data.
-sr--seedratioratio
Let the current torrent(s) seed until a specific ratio-SR--no-seedratio
Let the current torrent(s) seed regardless of ratio
-srd--seedratio-default
Let the current torrent(s) use the global seedratio settings
-td--tracker-addtracker
Add a tracker to a torrent
-tr--tracker-removetrackerId
Remove a tracker from a torrent
-s--start
Start the current torrent(s)
-S--stop
Stop the current torrent(s) from downloading or seeding
--start-paused
Start added torrents paused
--no-start-paused
Start added torrents unpaused
-t--torrentall | active | id | torrent-hash
Set the current torrent(s) for use by subsequent options. The literal all will apply following
requests to all torrents; the literal active will apply following requests to recently-active
torrents; and specific torrents can be chosen by id or hash. To set more than one current
torrent, join their ids together in a list, such as "-t2,4,6-8" to operate on the torrents whose
IDs are 2, 4, 6, 7, and 8.
--trash-torrent
Delete torrents after adding
--no-trash-torrent
Do not delete torrents after adding
-hl--honor-session
Make the current torrent(s) honor the session limits.
-HL--no-honor-session
Make the current torrent(s) not honor the session limits.
-u--uplimitlimit
Limit the maximum upload speed to limit kB/s. If current torrent(s) are selected this operates
on them. Otherwise, it changes the global setting.
-U--no-uplimit
Disable upload speed limits.
--utp Enable uTP for peer connections.
--no-utp
Disable uTP for peer connections. If current torrent(s) are selected this operates on them.
Otherwise, it changes the global setting.
-v--verify
Verify the current torrent(s)
-V--version
Show version number and exit
-w--download-dirdirectory
When used in conjunction with --add, set the new torrent's download folder. Otherwise, set the
default download folder.
-x--pex
Enable peer exchange (PEX).
-X--no-pex
Disable peer exchange (PEX).
-y--lds
Enable local peer discovery (LPD).
-Y--no-lds
Disable local peer discovery (LPD).
-pi--peer-info
List the current torrent's connected peers. In the `status' section of the list, the following
shorthand is used:
D: Downloading from this peer
d: We would download from this peer if they would let us
E: Encrypted connection
H: Peer was found through DHT
I: Peer is an incoming connection
K: Peer has unchoked us, but we're not interested
O: Optimistic unchoked
T: Peer is connected over uTP
U: Uploading to peer
u: We would upload to this peer if they asked
X: Peer was discovered through Peer Exchange (PEX)
?: We unchoked this peer, but they're not interested
--blocklist-update
Update blocklist from URL specified in remote client's settings with blocklist-url key.
Install Now
PNG Icons
