Eclipse SUMO duarouter Version 1.18.0
Copyright (C) 2001-2023 German Aerospace Center (DLR) and others; https://sumo.dlr.de
Shortest path router and DUE computer for the microscopic, multi-modal traffic
simulation SUMO.
ConfigurationOptions:-c, --configuration-file FILE
Loads the named config on startup
-C, --save-configuration FILE
Saves current configuration into FILE
--save-configuration.relative
Enforce relative paths when saving the configuration
--save-template FILE
Saves a configuration template (empty) into FILE
--save-schema FILE
Saves the configuration schema into FILE
--save-commented
Adds comments to saved template, configuration, or schema
InputOptions:-n, --net-file FILE
Use FILE as SUMO-network to route on
-a, --additional-files FILE
Read additional network data (districts, bus stops) from FILE(s)
-r, --route-files FILE
Read sumo routes, alternatives, flows, and trips from FILE(s)
--phemlight-path FILE
Determines where to load PHEMlight definitions from
--phemlight-year INT
Enable fleet age modelling with the given reference year in PHEMlight5
--phemlight-temperature FLOAT
Set ambient temperature to correct NOx emissions in PHEMlight5
-w, --weight-files FILE
Read network weights from FILE(s)
--lane-weight-files FILE
Read lane-based network weights from FILE(s)
-x, --weight-attribute STR
Name of the xml attribute which gives the edge weight
--junction-taz
Initialize a TAZ for every junction to use attributes toJunction and fromJunction
OutputOptions:-o, --output-file FILE
Write generated routes to FILE
--vtype-output FILE
Write used vehicle types into separate FILE
--keep-vtype-distributions
Keep vTypeDistribution ids when writing vehicles and their types
--emissions.volumetric-fuel
Return fuel consumption values in (legacy) unit l instead of mg
--named-routes
Write vehicles that reference routes by their id
--write-license
Include license info into every output file
--output-prefix STR
Prefix which is applied to all output files. The special string 'TIME' is replaced by the current
time.
--precision INT
Defines the number of digits after the comma for floating point output
--precision.geo INT
Defines the number of digits after the comma for lon,lat output
-H, --human-readable-time
Write time values as hour:minute:second or day:hour:minute:second rather than seconds
--alternatives-output FILE
Write generated route alternatives to FILE
--intermodal-network-output FILE
Write edge splits and connectivity to FILE
--intermodal-weight-output FILE
Write intermodal edges with lengths and travel times to FILE
--write-trips
Write trips instead of vehicles (for validating trip input)
--write-trips.geo
Write trips with geo-coordinates
--write-trips.junctions
Write trips with fromJunction and toJunction
--write-costs
Include the cost attribute in route output
--exit-times
Write exit times (weights) for each edge
--route-length
Include total route length in the output
ProcessingOptions:--max-alternatives INT
Prune the number of alternatives to INT
--with-taz
Use origin and destination zones (districts) for in- and output
--unsorted-input
Assume input is unsorted
-s, --route-steps TIME
Load routes for the next number of seconds ahead
--no-internal-links
Disable (junction) internal links
--randomize-flows
generate random departure times for flow input
--remove-loops
Remove loops within the route; Remove turnarounds at start and end of the route
--repair
Tries to correct a false route
--repair.from
Tries to correct an invalid starting edge by using the first usable edge instead
--repair.to
Tries to correct an invalid destination edge by using the last usable edge instead
--mapmatch.distance FLOAT
Maximum distance when mapping input coordinates (fromXY etc.) to the road network
--mapmatch.junctions
Match positions to junctions instead of edges
--bulk-routing
Aggregate routing queries with the same origin
--routing-threads INT
The number of parallel execution threads used for routing
--routing-algorithm STR
Select among routing algorithms ['dijkstra', 'astar', 'CH', 'CHWrapper']
--restriction-params STR[]
Comma separated list of param keys to compare for additional restrictions
--weights.interpolate
Interpolate edge weights at interval boundaries
--weights.expand
Expand the end of the last loaded weight interval to infinity
--weights.minor-penalty FLOAT
Apply the given time penalty when computing routing costs for minor-link internal lanes
--weights.random-factor FLOAT
Edge weights for routing are dynamically disturbed by a random factor drawn uniformly from
[1,FLOAT)
--weight-period TIME
Aggregation period for the given weight files; triggers rebuilding of Contraction Hierarchy
--weights.priority-factor FLOAT
Consider edge priorities in addition to travel times, weighted by factor
--astar.all-distances FILE
Initialize lookup table for astar from the given file (generated by marouter --all-pairs-output)
--astar.landmark-distances FILE
Initialize lookup table for astar ALT-variant from the given file
--astar.save-landmark-distances FILE
Save lookup table for astar ALT-variant to the given file
--gawron.beta FLOAT
Use FLOAT as Gawron's beta
--gawron.a FLOAT
Use FLOAT as Gawron's a
--keep-all-routes
Save routes with near zero probability
--skip-new-routes
Only reuse routes from input, do not calculate new ones
--keep-route-probability FLOAT
The probability of keeping the old route
--ptline-routing
Route all public transport input
--route-choice-method STR
Choose a route choice method: gawron, logit, or lohse
--logit
Use c-logit model (deprecated in favor of --route-choice-method logit)
--logit.beta FLOAT
Use FLOAT as logit's beta
--logit.gamma FLOAT
Use FLOAT as logit's gamma
--logit.theta FLOAT
Use FLOAT as logit's theta (negative values mean auto-estimation)
--persontrip.walkfactor FLOAT
Use FLOAT as a factor on pedestrian maximum speed during intermodal routing
--persontrip.walk-opposite-factor FLOAT
Use FLOAT as a factor on walking speed against vehicle traffic direction
--persontrip.transfer.car-walk STR[]
Where are mode changes from car to walking allowed (possible values: 'parkingAreas', 'ptStops',
'allJunctions' and combinations)
--persontrip.transfer.taxi-walk STR[]
Where taxis can drop off customers ('allJunctions, 'ptStops')
--persontrip.transfer.walk-taxi STR[]
Where taxis can pick up customers ('allJunctions, 'ptStops')
--persontrip.taxi.waiting-time TIME
Estimated time for taxi pickup
--railway.max-train-length FLOAT
Use FLOAT as a maximum train length when initializing the railway router
DefaultsOptions:--departlane STR
Assigns a default depart lane
--departpos STR
Assigns a default depart position
--departspeed STR
Assigns a default depart speed
--arrivallane STR
Assigns a default arrival lane
--arrivalpos STR
Assigns a default arrival position
--arrivalspeed STR
Assigns a default arrival speed
--defaults-override
Defaults will override given values
TimeOptions:-b, --begin TIME
Defines the begin time; Previous trips will be discarded
-e, --end TIME
Defines the end time; Later trips will be discarded; Defaults to the maximum time that SUMO can
represent
ReportOptions:-v, --verbose
Switches to verbose output
--print-options
Prints option values before processing
-?, --help
Prints this screen or selected topics
-V, --version
Prints the current version
-X, --xml-validation STR
Set schema validation scheme of XML inputs ("never", "local", "auto" or "always")
--xml-validation.net STR
Set schema validation scheme of SUMO network inputs ("never", "local", "auto" or "always")
--xml-validation.routes STR
Set schema validation scheme of SUMO route inputs ("never", "local", "auto" or "always")
-W, --no-warnings
Disables output of warnings
--aggregate-warnings INT
Aggregate warnings of the same type whenever more than INT occur
-l, --log FILE
Writes all messages to FILE (implies verbose)
--message-log FILE
Writes all non-error messages to FILE (implies verbose)
--error-log FILE
Writes all warnings and errors to FILE
--language STR
Language to use in messages
--ignore-errors
Continue if a route could not be build
--stats-period INT
Defines how often statistics shall be printed
--no-step-log
Disable console output of route parsing step
RandomNumberOptions:--random
Initialises the random number generator with the current system time
--seed INT
Initialises the random number generator with the given value
Install Now
PNG Icons
