evdev-joystick - joystick calibration program

evdev-joystick was written by Stephen Anthony, based on VDrift's G25manage tool.

       This manual page was written by Stephen Kitt <steve@sk2.org>.

evdev-joystick                                    Apr 19, 2016                                 evdev-joystick(1)

       Using the Linux input system, joysticks are expected to produce values between -32767 and 32767 for axes,
       with  0 meaning the joystick is centred.  Thus, full‐left should produce -32767 on the X axis, full‐right
       32767 on the X axis, full‐forward -32767 on the Y axis, and so on.

       Many joysticks and gamepads (especially older ones) are slightly mis‐aligned; as a result  they  may  not
       use  the full range of values (for the extremes of the axes), or more annoyingly they may not give 0 when
       centred.  Calibrating a joystick provides the kernel with information on  a  joystick's  real  behaviour,
       which  allows  the kernel to correct various joysticks' deficiencies and produce consistent output as far
       as joystick‐using software is concerned.

       jstest(1) is useful to determine whether a joystick is calibrated: when run, it  should  produce  all  0s
       when  the  joystick  is  at  rest,  and  each axis should be able to produce the values -32767 and 32767.
       Analog joysticks should produce values in between 0 and the extremes, but this is not necessary;  digital
       directional pads work fine with only the three values.

evdev-joystick calibrates joysticks.  Calibrating a joystick ensures the positions on  the  various  axes
       are correctly interpreted.

       evdev-joystick - joystick calibration program

--h, --help
              Print out a summary of available options.

       --l, --listdevs
              List all joystick devices found.

       --s, --showcal <device‐path>
              Show the current calibration for the specified device.

       --e, --evdev <device‐path>
              Specify the joystick device to modify.

       --a, --axis <axis>
              Specify the axis to modify (by default, all axes are calibrated).

       --m, --minimum <value>
              Change the minimum for the current joystick.

       --M, --maximum <value>
              Change the maximum for the current joystick.

       --d, --deadzone <value>
              Change the deadzone for the current joystick.

       --f, --fuzz <value>
              Change the fuzz for the current joystick.

ffset(1), jstest(1).

evdev-joystick--helpevdev-joystick--listdevsevdev-joystick--showcal <device‐path>
       evdev-joystick--evdevdevice‐path> [--axis <axis>] [--minimum <value>] [--maximum <value>] [--deadzone
       <value>] [--fuzz <value>]