doveadm-mailbox - Commands related to handling mailboxes

Arguments

mailbox
              Is the name of a mailbox, as visible to IMAP  clients,  except  in  UTF-8  format.  The  hierarchy
              separator  between  a  parent  and  child mailbox is commonly '/' or '.', but this depends on your
              selected mailbox storage format and namespace configuration. The mailbox names may also require  a
              namespace prefix.

Commands

mailboxcreatedoveadmmailboxcreate [-A|-uuser|-Ffile] [-Ssocket_path] [-gguid] [-s] mailbox ...

       This  command  is  used  to  create  one  or more mailboxes.  The mailbox format of the created mailboxes
       depends on the mail_location setting, or the user's mail field, returned by the userdb.

       -gguid
              Create the mailbox with the specified GUID.

       -s     When this option was given, the created mailboxes will be also added to the user's subscriptions.

   mailboxcryptokeymailboxcryptokeyexport|generate|list|password

       This command is used to manage  mail  crypt  plugin  cryptographic  keys.   Please  see  doveadm-mailbox-cryptokey(1) for more details.

   mailboxdeletedoveadmmailboxdelete [-A|-uuser|-Ffile] [-Ssocket_path] [-s] [-r] [-e] [-Z] mailbox ...

       This  command  deletes  a  mailbox  and  expunges  all  the messages it contains.  If the mailbox has any
       children, they won't be deleted, unless -r is given.

       -r     Delete mailboxes recursively

       -s     Unsubscribe deleted mailboxes.

       -e     Require mailboxes to be empty before deleting.

       -Z     Delete the mailbox as efficiently as possible, but the user may not be in fully  consistent  state
              afterwards.  For example quota may be wrong. This option is mainly useful when deleting the entire
              user.

   mailboxlistdoveadmmailboxlist [-7|-8] [-A|-uuser|-Ffile] [-Ssocket_path] [-s] [mailbox ...]

       To get an overview of existing mailboxes use this command.  It's also possible to use  wildcards  in  the
       mailbox name.
       When  the  -s  option is present, only subscribed mailboxes will be listed. Listed subscriptions may also
       contain mailboxes that are already deleted.

       -7     Lists the mailboxes with mUTF-7 encoding.

       -8     Lists the mailboxes with UTF-8 encoding.

   mailboxmutf7doveadmmailboxmutf7 [-7|-8] name ...

       The mailboxmutf7 command may be used to convert the international mailbox name into a  modified  version
       of  the  UTF-7  encoding  and  vice  versa.   See  RFC  3501, section 5.1.3 (Mailbox International Naming
       Convention).

       -7     Indicates that the name's string representation is mUTF-7 encoded and it should  be  converted  to
              UTF-8.

       -8     Indicates that the name's is UTF-8 encoded and should be converted to mUTF-7 (default).

       name   One or more mailbox names that should be converted.

   mailboxrenamedoveadmmailboxrename [-A|-uuser|-Ffile] [-Ssocket_path] [-s] old_namenew_name

       The mailboxrename command is used to rename the mailbox old_name to new_name.
       When the -s option is given, old_name will be unsubscribed and new_name will be subscribed.

   mailboxstatusdoveadm [-fformatter] mailboxstatus [-A|-uuser|-Ffile] [-Ssocket_path] [-t] fieldsmailbox ...

       Show the status of one or more mailboxes.  The mailbox name may also contain wildcards.
       This command uses by default the output formatterflow.

       -t     Summarize  the  values  of  the  status  fieldsmessages, recent, unseen and/or vsize of multiple
              mailboxes to a sum (total).

       fields Specify the status fields which should be shown.  In order  to  specify  multiple  status  fields,
              enclosed them in quotes.

              all    This  is a special status field name.  It means show all of the following fields.  When the
                     -t option is present, it means show only the messages, recent, unseen and vsizefields.

              guid   The mailbox's globally unique identifier.

              highestmodseq
                     The highest mod-sequence value of all messages in the mailbox.

              messages
                     The number of messages in the mailbox.

              recent The number of messages with the \Recent flag set.

              uidnext
                     The next unique identifier value.

              uidvalidity
                     The unique identifier validity value.

              unseen The message sequence number of the first unseen message in the mailbox.

              vsize  The mailbox's virtual size, computed with CRLF line terminators.

              firstsaved
                     Saved time of the first mail in the mailbox.

   mailboxsubscribedoveadmmailboxsubscribe [-A|-uuser|-Ffile] [-Ssocket_path] mailbox ...

       This command is used to subscribe one or more mailboxes.

   mailboxunsubscribedoveadmmailboxunsubscribe [-A|-uuser|-Ffile] [-Ssocket_path] mailbox ...

       This command is used to unsubscribe one or more mailboxes.

   mailboxupdatedoveadmmailboxupdate [-A|-uuser|-F]  [-Ssocket_path]  [--mailbox-guidguid]  [--uid-validityuid]
       [--min-next-uiduid]  [--min-first-recent-uiduid] [--min-highest-modseqseq] [--min-highest-pvt-modseqseq] mailbox...

       This command is used to set UID validity, next UID, first recent UID and modification sequence values.

       Usually this is only ever to be used during migration, or restoring  mailbox  after  disaster.   Settings
       these values is highly discouraged, and is not supported for all mail backends.

   mailboxcachepurgedoveadmmailboxcachepurge [-A|-uuser|-Ffile] [-Ssocket_path] mailbox...

       Purge  the  dovecot.index.cache  file.  Most  importantly  this  frees up disk space from mails that were
       already deleted. Normally there i no need to run this command manually, because the compression  is  also
       run automatically.

   mailboxcachedecisiondoveadmmailboxcachedecision [-A|-uuser|-Ffile] [-Ssocket_path] [--all] [--fieldslistoffields]
       [--last-usedunixtimestamp] [--decisionno|temp|yes] mailbox...

       This command is used to list or change caching decisions for  field(s)  in  mailbox(es).   You  can  list
       decisions by leaving out decision and last-used parameters.

       --all  List or change all fields.

       --fields
              List or change these comma/space separated fields.

       --decision
              Set  field  caching decision. Yes means it's always cached.  Temp means it's provisionally cached.
              No means the field is not cached.

       --last-used
              Set field's last used timestamp.

       NOTE. This command cannot be  used  to  add  new  fields  to  cache!  You  need  to  first  add  them  to
       configuration.  Setting caching to no will not immediately drop field from cache, it will stop adding the
       field to cache.

   mailboxcacheremovedoveadmmailboxcacheremove [-A|-uuser|-Ffile] [-Ssocket_path] searchquery

       Remove any matching mail(s) from cache.

       WARNING! This command can erase ALL cached data, causing system slowness.

Description

doveadmmailbox can be used to query and modify mailboxes.

Example

       List subscribed mailboxes, beginning with 'dovecot', of user bob.

       doveadmmailboxlist-s-ubobdovecot*
       dovecot
       dovecot/pigeonhole
       dovecot/pigeonhole/2.0

       Now have a look at the status of user bob's dovecot mailboxes.

       doveadm-ftablemailboxstatus-ubob"messagesvsize"dovecot*
       mailbox                                    messages vsize
       dovecot                                    20501    93968492
       dovecot/pigeonhole                         0        0
       dovecot/pigeonhole/2.0                     47       323474

       Converting an internationalized mailbox name from mUTF-7 to UTF-8 and vice versa.

       doveadmmailboxmutf7-7"~peter/mail/&U,BTFw-/&ZeVnLIqe-"
       ~peter/mail/台北/日本語
       doveadmmailboxmutf7~peter/mail/台北/日本語

       ~peter/mail/&U,BTFw-/&ZeVnLIqe-

Name

       doveadm-mailbox - Commands related to handling mailboxes

Options

Global doveadm(1) options:

-D Enables verbosity and debug messages.

-fformatter
Specifies the formatter for formatting the output. Supported formatters are:

flow prints each line with key=value pairs.

pager prints each key: value pair on its own line and separates records with form feed character
(^L).

tab prints a table header followed by tab separated value lines.

table prints a table header followed by adjusted value lines.

-osetting=value
Overrides the configuration setting from /etc/dovecot/dovecot.conf and from the userdb with the
given value. In order to override multiple settings, the -o option may be specified multiple
times.

-v Enables verbosity, including progress counter.

Command specific options:

-A If the -A option is present, the command will be performed for all users. Using this option in
combination with system users from userdb{driver=passwd} is not recommended, because it
contains also users with a lower UID than the one configured with the first_valid_uid setting.

When the SQL userdb module is used make sure that the iterate_query setting in
/etc/dovecot/dovecot-sql.conf.ext matches your database layout. When using the LDAP userdb
module, make sure that the iterate_attrs and iterate_filter settings in /etc/dovecot/dovecot-ldap.conf.ext match your LDAP schema. Otherwise doveadm(1) will be unable to iterate over all
users.

-Ffile
Execute the command for all the users in the file. This is similar to the -A option, but instead
of getting the list of users from the userdb, they are read from the given file. The file
contains one username per line.

-Ssocket_path
The option's argument is either an absolute path to a local UNIX domain socket, or a hostname and
port (hostname:port), in order to connect a remote host via a TCP socket.

This allows an administrator to execute doveadm(1) mail commands through the given socket.

-uuser/mask
Run the command only for the given user. It's also possible to use '*' and '?' wildcards (e.g. -u
*@example.org).
When neither the -A option, nor the -Ffile option, nor the -uuser was specified, the command
will be executed with the environment of the currently logged in user.

Reporting Bugs

       Report  bugs,  including  doveconf-n  output,  to  the  Dovecot  Mailing  List   <dovecot@dovecot.org>.
       Information about reporting bugs is available at: http://dovecot.org/bugreport.html

Synopsis

doveadm [-Dv] [-fformatter] mailbox_cmd [options] [arguments]