PositionalargumentsURL A URL to attempt to extract streams from.
Usually, the protocol of http(s) URLs can be omitted (https://), depending on the implementation
of the plugin being used.
Alternatively, the URL can also be specified by using the --url option.
STREAM Stream to play.
Use best or worst for selecting the highest or lowest available quality.
Fallback streams can be specified by using a comma-separated list:
"720p,480p,best"
If no stream is specified and --default-stream is not used, then a list of available streams will
be printed.
Generaloptions-h--help Show this help message and exit.
-V--version
Show version string and exit.
--version-check
Run a version check and exit.
--auto-version-check{yes,true,1,on,no,false,0,off}
Unused, kept for compatibility reasons.
Default is: "no".
--plugins
Print a list of all currently installed plugins.
--plugin-dirDIRECTORY
Load plugins from this directory.
Can be set multiple times to load plugins from multiple directories.
--plugin-dirsDIRECTORY
Load plugins from a list of comma-separated directories. (deprecated)
--show-matchersPLUGIN
Show the list of matchers of a specific plugin (URL regex pattern with opt. priority and opt.
name).
The output is a human-readable pseudo YAML format. Please use --json when reading matcher data
programmatically.
--can-handle-urlURL
Check if Streamlink has a plugin that can handle the specified URL.
Status code is 0 on success, 1 on failure.
Useful for external scripting.
--can-handle-url-no-redirectURL
Same as --can-handle-url, but without following redirects when looking up the URL.
--configFILENAME
Load options from this config file.
Can be repeated to load multiple files, in which case the options are merged on top of each other
where the last config has highest priority.
--no-config
Disable loading any default or custom config files.
--localeLOCALE
Override the system's locale setting, for selecting the preferred subtitle and audio language.
The locale is formatted as [language_code]_[country_code], e.g. en_US or es_ES.
Default is: systemlocale.
Loggingarguments-lLEVEL--loglevelLEVEL
Set the log message threshold.
Valid levels are, in order of increasing verbosity:
none, critical, error, warning, info, debug, trace, all
Default is: "info".
--logformatFORMAT
Set a custom logging format.
See the Python standard library's logging.Formatter docs for more information about the logging
format and the available LogRecord attributes. Streamlink's formatter uses the curly brace style.
The default format depends on the chosen log level.
For verbose levels (trace and all):
Default is: "[{asctime}][{name}][{levelname}]{message}".
Otherwise:
Default is: "[{name}][{levelname}]{message}".
--logdateformatDATEFORMAT
Set a custom logging date format.
This formats the LogRecord's asctime attribute via strftime().
The default date format depends on the chosen log level.
For verbose levels (trace and all):
Default is: "%H:%M:%S.%f".
Otherwise:
Default is: "%H:%M:%S".
--logfileFILE
Append log output to FILE instead of writing to stdout/stderr.
User prompts and download progress won't be written to FILE.
A value of - (dash) will set the file name to an ISO8601-like string and will choose the following
default log directories.
Windows:
%TEMP%\streamlink\logs
macOS:
${HOME}/Library/Logs/streamlink
Linux/BSD:
${XDG_STATE_HOME:-${HOME}/.local/state}/streamlink/logs
-Q--quiet
Hide all log output.
Alias for --loglevel=none.
-j--json Output JSON representations instead of the normal text output.
Useful for external scripting.
Networkarguments--interfaceINTERFACE
Set the network interface.
-4--ipv4 Resolve address names to IPv4 only. This option overrides --ipv6.
-6--ipv6 Resolve address names to IPv6 only. This option overrides --ipv4.
Playeroptions-pPATH--playerPATH
Set the player executable that will be launched (unless a different output method was chosen).
Either set an absolute or relative path to the player executable, or just set the executable's
name if it can be resolved from the paths of the system's PATH environment variable.
In addition to setting the player executable path, custom player arguments can be set via
--player-args.
NOTE:
In the past, --player allowed defining additional player arguments, which as a consequence
required wrapping player paths that contained spaces in quotation marks. This is unsupported
since release 6.0.0.
Default is: VLCplayer,ifavailable.
-aARGUMENTS--player-argsARGUMENTS
Set a string of custom --player launch arguments that will be parsed and tokenized.
The value can contain formatting variables surrounded by curly braces, { and }. Curly brace
characters can be escaped by doubling, e.g. {{ and }}.
Available formatting variables:
{playerinput}
This is the input argument that the --player will receive. For standard input (stdin), it
is - (dash), but it can also be a file path or URL, depending on the options used. If
unset, then the player input argument will be appended to the parsed player arguments list.
{playertitleargs}
The automatically generated player title arguments, if a supported --player was found. See
--title for more. If unset, automatically generated player title arguments will be
prepended to the parsed player arguments list.
Example:
streamlink -p vlc -a "--play-and-exit --no-one-instance" <url> [stream]
Default is: "".
--player-envKEY=VALUE
Add an additional environment variable to the spawned --player process, in addition to the ones
inherited from the Streamlink/Python parent process. This allows setting player environment
variables in config files.
Can be repeated to add multiple environment variables.
-v--player-verbose
Write the --player's stdout/stderr output to Streamlink's stdout/stderr output.
--verbose-player
Deprecated in favor of --player-verbose.
-n--player-fifo
Make the --player read the stream through a named pipe instead of the stdin pipe.
--fifo Deprecated in favor of --player-fifo.
--player-http
Make the --player read the stream through HTTP instead of the stdin pipe.
--player-continuous-http
Make the --player read the stream through HTTP, but unlike --player-http, it will continuously try
to open the stream if the player requests it.
This enables the handling of stream disconnects if the player is capable of reconnecting to a HTTP
stream. This is usually done by setting the player to a "repeat mode".
--player-external-http
Serve stream data through HTTP without opening the --player. This is useful to allow external
devices like smartphones or streaming boxes to watch streams they wouldn't be able to otherwise.
The default behavior is similar to the --player-continuous-http option, but no player program will
be started, and the server will listen on all available connections instead of just in the local
(loopback) interface.
See --player-external-http-interface for choosing a specific network interface, and see
--player-external-http-port for choosing a non-randomized port.
Optionally, the --player-external-http-continuous option allows for disabling the continuous
run-mode, so that Streamlink will stop when the stream ends.
The URLs that can be used to access the stream will be printed to the console, and the server can
be interrupted using CTRL-C.
--player-external-http-continuous{yes,true,1,on,no,false,0,off}
Set the run-mode of --player-external-http to continuous or non-continuous.
In the continuous run-mode, Streamlink will keep running after the stream has ended and will wait
for the next HTTP request being made unless it gets shut down via CTRL-C.
If set to non-continuous, Streamlink will stop once the stream has ended.
Default is: true.
--player-external-http-interfaceINTERFACE
Set the network interface on which the HTTP server will be listening on. If unset or set to
0.0.0.0, all available interfaces will be bound.
--player-external-http-portPORT
Set the port of the external HTTP server if that mode is enabled. Omit or set to 0 to use a
random high ( >1024) port.
--player-passthroughTYPES
A comma-delimited list of stream types to pass to the --player as a URL to let it handle the
transport of the stream instead of Streamlink.
Stream types that can be converted into a playable URL are:
hls, http
Make sure the player can handle the stream type when using this.
--player-no-close
By default, Streamlink will close the --player when the stream ends. This is to avoid "dead" GUI
players lingering after Streamlink has exited.
It does however have the side-effect of sometimes closing a player before it has played back all
of its cached data.
This option will instead let the player decide when to exit.
-tTITLE--titleTITLE
Change the title of the --player's window.
Please see the "Metadatavariables" section of Streamlink's CLI documentation for all available
metadata variables, as well as the "Plugins" section for the list of metadata variables defined in
each plugin.
Only the following players are supported:
mpv, potplayer, vlc
Example:
streamlink -p mpv --title "{author} - {category} - {title}" <URL> [STREAM]
Fileoutputoptions-O--stdout
Write stream data to stdout instead of playing it in the --player.
-oFILENAME--outputFILENAME
Write stream data to FILENAME instead of playing it in the --player. If FILENAME is set to -
(dash), then the stream data will be written to stdout, similar to the --stdout argument.
Directories and subdirectories will be created if they do not exist, if filesystem permissions
allow.
Unless --force is set, Streamlink will ask for confirmation before writing if FILENAME already
exists.
Please see the "Metadatavariables" section of Streamlink's CLI documentation for all available
metadata variables, as well as the "Plugins" section for the list of metadata variables defined in
each plugin.
Unsupported characters in substituted variables will be replaced with an underscore.
Example:
streamlink --output "~/recordings/{author}/{category}/{id}-{time:%Y%m%d%H%M%S}.ts" <URL> [STREAM]
-rFILENAME--recordFILENAME
Write stream data to FILENAME while at the same time allowing playback in the --player or writing
it to --stdout. If FILENAME is set to - (dash), then the stream data will be written to stdout,
similar to the --stdout argument, while still opening the player.
Directories and subdirectories will be created if they do not exist, if filesystem permissions
allow.
Unless --force is set, Streamlink will ask for confirmation before writing if FILENAME already
exists.
Please see the "Metadatavariables" section of Streamlink's CLI documentation for all available
metadata variables, as well as the "Plugins" section for the list of metadata variables defined in
each plugin.
Unsupported characters in substituted variables will be replaced with an underscore.
Example:
streamlink --record "~/recordings/{author}/{category}/{id}-{time:%Y%m%d%H%M%S}.ts" <URL> [STREAM]
-RFILENAME--record-and-pipeFILENAME
Deprecated in favor of --stdout--record=FILENAME.
--fs-safe-rules
The rules used to make formatting variables filesystem-safe are chosen automatically according to
the type of system in use. This overrides the automatic detection.
Intended for use when Streamlink is running on a UNIX-like OS but writing to Windows filesystems
such as NTFS; USB devices using VFAT or exFAT; CIFS shares that are enforcing Windows filename
limitations, etc.
These characters are replaced with an underscore for the rules in use:
• POSIX: \x00-\x1F/
• Windows: \x00-\x1F\x7F"*/:<>?\|-f--force
When using --output or --record, always write to file even if it already exists (overwrite).
--progress{yes,force,no}
When using --output or --record, show or hide the download progress bar, or force it if there's no
terminal.
Default is: yes.
Streamoptions--urlURL
A URL to attempt to extract streams from.
Usually, the protocol of http(s) URLs can be omitted (https://), depending on the implementation
of the plugin being used.
This is an alternative to setting the URL using a positional argument and can be useful if set in
a config file.
--default-streamSTREAM
Stream to play.
Use best or worst for selecting the highest or lowest available quality.
Fallback streams can be specified by using a comma-separated list:
"720p,480p,best"
This is an alternative to setting the stream using a positional argument and can be useful if set
in a config file.
--stream-url
If possible, translate the resolved stream to a URL and print it.
--retry-streamsDELAY
Retry fetching the list of available streams until streams are found while waiting DELAY second(s)
between each attempt. If unset, only one attempt will be made to fetch the list of streams
available.
The number of fetch retry attempts can be capped with --retry-max.
--retry-maxCOUNT
When using --retry-streams, stop retrying the fetch after COUNT retry attempt(s). Fetch will retry
infinitely if COUNT is zero or unset.
If --retry-max is set without setting --retry-streams, the delay between retries will default to 1
second.
--retry-openATTEMPTS
After a successful fetch, try ATTEMPTS time(s) to open the stream until giving up.
Default is: 1.
--stream-typesTYPES--stream-priorityTYPES
A comma-delimited list of stream types to allow.
The order will be used to separate streams when there are multiple streams with the same name but
different stream types. Any stream type not listed will be omitted from the available streams
list. An * (asterisk) can be used as a wildcard to match any other type of stream, e.g. dash.
Default is: "hls,http,*".
--stream-sorting-excludesSTREAMS
Fine-tune the best and worst stream name synonyms by excluding unwanted streams.
If all of the available streams get excluded, best and worst will become inaccessible and new
special stream synonyms best-unfiltered and worst-unfiltered can be used as a fallback selection
method.
The filter-expression's format is:
[operator]<value>
Valid operators are >, >=, < and <=. If no operator is specified then equality is tested.
For example this will exclude streams ranked higher than "480p":
--stream-sorting-excludes ">480p"
Multiple filters can be used by separating each expression with a comma.
For example this will exclude streams from two quality types:
--stream-sorting-excludes ">480p,>medium"
Streamtransportoptions--ringbuffer-sizeSIZE
The maximum size of the ringbuffer.
Mebibytes or kibibytes (base 2) can be specified via the M or K suffix respectively.
The ringbuffer is used as a temporary storage between the stream and the player. This allows
Streamlink to download the stream faster than the player which reads the data from the ringbuffer.
The smaller the size of the ringbuffer, the higher the chance of the player buffering if the
download speed decreases, and the higher the size, the more data can be use as a storage to
recover from volatile download speeds.
Most players have their own additional cache and will read the ringbuffer's content as soon as
data is available. If the player stops reading data while playback is paused, Streamlink will
continue to download the stream in the background as long as the ringbuffer doesn't get full.
Default is: "16M".
--stream-segment-attemptsATTEMPTS
The number of download attempts of each stream segment before giving up.
This applies to all different kinds of segmented stream types, such as DASH, HLS, etc.
Default is: 3.
--stream-segment-threadsTHREADS
The size of the thread pool used to download segments. Minimum value is 1 and maximum is 10.
This applies to all different kinds of segmented stream types, such as DASH, HLS, etc.
Default is: 1.
--stream-segment-timeoutTIMEOUT
The maximum time to wait for each segment to start downloading.
This applies to all different kinds of segmented stream types, such as DASH, HLS, etc.
Default is: 10.0.
--stream-timeoutTIMEOUT
The maximum time to wait for an unfiltered stream to continue outputting data.
This applies to all different kinds of stream types, such as DASH, HLS, HTTP, etc.
Default is: 60.0.
--mux-subtitles
Automatically mux available subtitles into the output stream.
Needs to be supported by the used plugin.
HLSoptions--hls-live-edgeSEGMENTS
Number of segments from the live stream's current live position to begin streaming. The size or
length of each segment is determined by the streaming provider.
Lower values will decrease the latency, but will also increase the chance of buffering, as there
is less time for Streamlink to download segments and write their data to the output buffer. The
number of parallel segment downloads can be set with --stream-segment-threads and the HLS playlist
reload time to fetch and queue new segments can be overridden with --hls-playlist-reload-time.
Default is: 3.
NOTE:
During live playback, the caching/buffering settings of the used player will add additional
latency. To adjust this, please refer to the player's own documentation for the required
configuration. Player parameters can be set via --player-args.
--hls-segment-stream-data
Immediately write segment data into output buffer while downloading.
--hls-playlist-reload-attemptsATTEMPTS
The maximum number of attempts when reloading the HLS playlist before giving up.
Default is: 3.
--hls-playlist-reload-timeTIME
Set a custom HLS playlist reload time value, either in seconds or by using one of the following
keywords:
• segment: The duration of the last segment in the current playlist
• live-edge: The sum of segment durations of the live edge value minus one
• default: The playlist's target duration metadata
Default is: default.
--hls-segment-queue-thresholdFACTOR
The multiplication factor of the HLS playlist's target duration after which the stream will be
stopped early if no new segments were queued after refreshing the playlist (multiple times). The
target duration defines the maximum duration a single segment can have, meaning new segments must
be available during this time frame, otherwise playback issues can occur.
The intention of this queue threshold is to be able to stop early when the end of a stream doesn't
get announced by the server, so Streamlink doesn't have to wait until a read-timeout occurs. See
--stream-timeout.
Set to 0 to disable.
Default is: 3.
--hls-segment-ignore-namesNAMES
A comma-delimited list of segment names that will get filtered out.
Example: --hls-segment-ignore-names000,001,002
This will ignore every segment that ends with 000.ts, 001.ts and 002.ts
Default is: None.
--hls-segment-key-uriURI
Override the segment encryption key URIs for encrypted streams.
The value can be templated using the following variables, which will be replaced with their
respective part from the source segment URI:
{url} {scheme} {netloc} {path} {query}
Examples:
--hls-segment-key-uri "https://example.com/hls/encryption_key"
--hls-segment-key-uri "{scheme}://1.2.3.4{path}{query}"
--hls-segment-key-uri "{scheme}://{netloc}/custom/path/to/key"
Default is: None.
--hls-audio-selectCODE
Select one or more specific audio sources by language code or name. Can be set to * (asterisk) to
include all audio sources.
Examples:
--hls-audio-select "English,German"
--hls-audio-select "en,de"
--hls-audio-select "*"
NOTE:
This is only useful in special circumstances where the regular locale option fails, such as
when multiple sources of the same language exist.
--hls-start-offset[[XX:]XX:]XX[.XX]|[XXh][XXm][XX[.XX]s]
The amount of time to skip from the beginning of the stream. For live streams, this is a negative
offset from the end of the stream (rewind).
Default is: 0.
--hls-duration[[XX:]XX:]XX[.XX]|[XXh][XXm][XX[.XX]s]
Limit the playback duration, useful for watching segments of a stream. The actual duration may be
slightly longer, as it is rounded to the nearest HLS segment.
Default is: unlimited.
--hls-live-restart
Skip to the beginning of a live stream, or as far back as possible.
DASHoptions--dash-manifest-reload-attemptsATTEMPTS
The maximum number of attempts when reloading the DASH manifest before giving up.
Default is: 3.
FFmpegoptions--ffmpeg-ffmpegFILENAME
Set the location of the FFmpeg executable if it can't be resolved from the paths of the system's
PATH environment variable.
FFmpeg is required to access or mux separate video and audio streams, e.g. in DASH streams or HLS
streams with multiple sources.
Example: --ffmpeg-ffmpeg"/usr/local/bin/ffmpeg"--ffmpeg-no-validation
Disable FFmpeg validation and version logging.
--ffmpeg-verbose
Write FFmpeg's stderr output to Streamlink's stderr output.
--ffmpeg-verbose-pathPATH
Write FFmpeg's stderr output to PATH.
--ffmpeg-loglevelLOGLEVEL
Change FFmpeg's -loglevel value to LOGLEVEL.
Unless --ffmpeg-verbose or --ffmpeg-verbose-path is set, changing the log level won't have any
effect.
Default is: "info".
--ffmpeg-foutOUTFORMAT
Set the output format to OUTFORMAT. This only applies to streams which require muxing.
Default is: "matroska".
Example: --ffmpeg-fout"mpegts"--ffmpeg-video-transcodeCODEC
Transcode the video to CODEC. This only applies to streams which require muxing.
Default is: "copy".
Example: --ffmpeg-video-transcode"h264"--ffmpeg-audio-transcodeCODEC
Transcode the audio to CODEC. This only applies to streams which require muxing.
Default is: "copy".
Example: --ffmpeg-audio-transcode"aac"--ffmpeg-copyts
Set the -copyts FFmpeg option, so input timestamps won't be processed and the initial start time
offset value be kept.
--ffmpeg-start-at-zero
Enable the -start_at_zero FFmpeg option when using --ffmpeg-copyts.
HTTPoptions--http-proxyHTTP_PROXY
An HTTP proxy to use for all HTTP and HTTPS requests, including WebSocket connections.
Example: --http-proxy"http://hostname:port/"--http-cookieKEY=VALUE
A cookie to add to each HTTP request.
Can be repeated to add multiple cookies.
--http-headerKEY=VALUE
A header to add to each HTTP request.
Can be repeated to add multiple headers.
--http-query-paramKEY=VALUE
A query parameter to add to each HTTP request.
Can be repeated to add multiple query parameters.
--http-ignore-env
Ignore HTTP settings set in the environment, such as environment variables (HTTP_PROXY, etc) or
~/.netrc authentication.
--http-no-ssl-verify
Don't attempt to verify TLS/SSL certificates.
Use with caution, as it has TLS/SSL security implications.
--http-disable-dh
Disable Diffie Hellman key exchange.
Use with caution, as it has TLS/SSL security implications.
--http-ssl-certPEM_FILENAME
SSL certificate to use: a .pem file.
--http-ssl-cert-crt-keyCRT_FILENAMEKEY_FILENAME
SSL certificate to use: a .crt and a .key file.
--http-timeoutTIMEOUT
Set the general timeout value used by all HTTP requests except the ones covered by other options.
Default is: 20.0.
Webbrowseroptions--webbrowser{yes,true,1,on,no,false,0,off}
Enable or disable support for Streamlink's webbrowser API.
Streamlink's webbrowser API allows plugins which implement it to launch a web browser and extract
data from websites which they otherwise couldn't do via the regular HTTP session in Python due to
specific JavaScript restrictions.
The web browser is run isolated and in a clean environment without access to regular user data.
Streamlink currently only supports Chromium-based web browsers using the Chrome Devtools Protocol
(CDP). This includes Chromium itself, Google Chrome, Microsoft Edge, Brave, Vivaldi, and others,
but full support for third party Chromium forks is not guaranteed. Please try Chromium or Google
Chrome when encountering any issues.
Default is: true.
--webbrowser-executablePATH
Path to the web browser's executable.
By default, it is looked up automatically according to the rules of the used webbrowser API
implementation. This usually involves a list of known executable names and fallback paths on all
supported operating systems.
--webbrowser-timeoutTIME
The maximum amount of time which the web browser can take to launch and execute.
--webbrowser-cdp-hostHOST
Host for the web browser's inter-process communication interface (CDP specific).
Default is: 127.0.0.1.
--webbrowser-cdp-portPORT
Port for the web browser's inter-process communication interface (CDP specific).
Tries to find a free port by default.
--webbrowser-cdp-timeoutTIME
The maximum amount of time for waiting on a single CDP command response.
--webbrowser-headless{yes,true,1,on,no,false,0,off}
Whether to launch the web browser in headless mode or not. When enabled, it stays completely
hidden and doesn't require a desktop environment to run.
Please be aware that headless mode might be blocked by websites which implement bot detections.
Default is: false.
PluginoptionsBbciplayer--bbciplayer-usernameUSERNAME
The username used to register with bbc.co.uk.
--bbciplayer-passwordPASSWORD
A bbc.co.uk account password to use with --bbciplayer-username.
--bbciplayer-hd
Prefer HD streams over local SD streams, some live programmes may not be broadcast in HD.
Clubbingtv--clubbingtv-username
The username used to register with Clubbing TV.
--clubbingtv-password
A Clubbing TV account password to use with --clubbingtv-username.
Nicolive--niconico-emailEMAIL
The email or phone number associated with your Niconico account
--niconico-passwordPASSWORD
The password of your Niconico account
--niconico-user-sessionVALUE
Value of the user-session token.
Can be used as an alternative to providing a password.
--niconico-purge-credentials
Purge cached Niconico credentials to initiate a new session and reauthenticate.
--niconico-timeshift-offset[[XX:]XX:]XX|[XXh][XXm][XXs]
Amount of time to skip from the beginning of a stream.
Default is: 0.
Openrectv--openrectv-emailEMAIL
The email associated with your openrectv account, required to access any openrectv stream.
--openrectv-passwordPASSWORD
An openrectv account password to use with --openrectv-email.
Pixiv--pixiv-sessionidSESSIONID
The pixiv.net sessionid that's used in pixiv's PHPSESSID cookie.
--pixiv-devicetokenDEVICETOKEN
The pixiv.net device token that's used in pixiv's device_token cookie.
--pixiv-purge-credentials
Purge cached Pixiv credentials to initiate a new session and reauthenticate.
--pixiv-performerUSER
Select a co-host stream instead of the owner stream.
Raiplay--raiplay-emailEMAIL
The email used to register with raiplay.it.
--raiplay-passwordPASSWORD
A raiplay.it account password to use with --raiplay-email.
--raiplay-purge-credentials
Purge cached RaiPlay credentials to initiate a new session and reauthenticate.
Soop--soop-usernameUSERNAME
The username used to register with sooplive.co.kr.
--soop-passwordPASSWORD
A sooplive.co.kr account password to use with --soop-username.
--soop-purge-credentials
Purge cached Soop credentials to initiate a new session and reauthenticate.
--soop-stream-passwordSTREAM_PASSWORD
The password for the stream.
Steam--steam-emailEMAIL
A Steam account email address to access friends/private streams
--steam-passwordPASSWORD
A Steam account password to use with --steam-email.
Streann--streann-urlURL
Source URL where the iframe is located, only required for direct URLs of ott.streann.com
Tf1--tf1-emailEMAIL
The email address used to register with tf1.fr.
--tf1-passwordPASSWORD
A tf1.fr account password to use with --tf1-email.
--tf1-purge-credentials
Purge cached tf1.fr credentials to initiate a new session and reauthenticate.
Twitcasting--twitcasting-passwordPASSWORD
Password for private Twitcasting streams.
Twitch--twitch-disable-ads
Skip embedded advertisement segments at the beginning or during a stream. Will cause these
segments to be missing from the output.
--twitch-low-latency
Enables low latency streaming by prefetching HLS segments. Sets --hls-segment-stream-data to true
and --hls-live-edge to 2, if it is higher. Reducing --hls-live-edge to 1 will result in the
lowest latency possible, but will most likely cause buffering.
In order to achieve true low latency streaming during playback, the player's caching/buffering
settings will need to be adjusted and reduced to a value as low as possible, but still high enough
to not cause any buffering. This depends on the stream's bitrate and the quality of the
connection to Twitch's servers. Please refer to the player's own documentation for the required
configuration. Player parameters can be set via --player-args.
NOTE:
Low latency streams have to be enabled by the broadcasters on Twitch themselves. Regular
streams can cause buffering issues with this option enabled due to the reduced --hls-live-edge
value.
--twitch-api-headerKEY=VALUE
A header to add to each Twitch API HTTP request.
Can be repeated to add multiple headers.
Useful for adding authentication data that can prevent ads. See the plugin-specific documentation
for more information.
--twitch-access-token-paramKEY=VALUE
A parameter to add to the API request for acquiring the streaming access token.
Can be repeated to add multiple parameters.
--twitch-force-client-integrity
Don't attempt requesting the streaming access token without a client-integrity token.
--twitch-purge-client-integrity
Purge cached Twitch client-integrity token and acquire a new one.
Ustreamtv--ustream-passwordPASSWORD
A password to access password protected UStream.tv channels.
Ustvnow--ustvnow-usernameUSERNAME
Your USTV Now account username
--ustvnow-passwordPASSWORD
Your USTV Now account password
Wwenetwork--wwenetwork-emailEMAIL
The email associated with your WWE Network account, required to access any WWE Network stream.
--wwenetwork-passwordPASSWORD
A WWE Network account password to use with --wwenetwork-email.
Yupptv--yupptv-boxidBOXID
The yupptv.com boxid that's used in the BoxId cookie.
--yupptv-yuppflixtokenYUPPFLIXTOKEN
The yupptv.com yuppflixtoken that's used in the YuppflixToken cookie.
--yupptv-purge-credentials
Purge cached YuppTV credentials to initiate a new session and reauthenticate.
Zattoo--zattoo-emailEMAIL
The email associated with your zattoo account, required to access any zattoo stream.
--zattoo-passwordPASSWORD
A zattoo account password to use with --zattoo-email.
--zattoo-purge-credentials
Purge cached zattoo credentials to initiate a new session and reauthenticate.
--zattoo-stream-typesTYPES
A comma-delimited list of stream types which should be used.
The following types are allowed: dash, hls7
Default is: "dash".
Install Now
PNG Icons
Emojis