metasys - Driver for Meta System UPS equipment

       Fabio Di Niro <blaxwan@users.sourceforge.net>

       This driver has been tested on Meta System HF Millennium 820 and ally HF 1000 only.

       Any information about the use of the driver with the other listed UPS are really welcome.

       The needed cable is a standard pin-to-pin serial cable with at least pins 2, 3, and 5 (on DB9 connector)
       connected.

       This driver supports no extra arguments from ups.conf(5).

       metasys - Driver for Meta System UPS equipment

Thecoredriver:nutupsdrv(8)

   Internetresources:
       •   The NUT (Network UPS Tools) home page: https://www.networkupstools.org/historic/v2.8.3/

       •   Meta System UPS protocol: https://networkupstools.org/ups-protocols.html#_legrand

Network UPS Tools 2.8.3                            07/08/2025                                         METASYS(8)

       The metasys driver was written with the "Meta System UPS Protocol Rev.1.12" kindly supplied from Meta
       System.

       The driver should support all the common features of the UPS models:

       •   HF Line (/2) 1-8 boards

       •   HF Millennium (810, 820)

       •   HF TOP Line (910, 920, 930, 940, 950, 970, 980)

       •   ECO Network (750, 1000, 1050, 1500, 1800, 2000, 2100, 2500, 3000)

       •   ECO (305, 308, 311, 511, 516, 519, 522, SX, SXI)

       •   ally HF (800, 1000, 1250, 1600, 2000, 2500)

       •   Megaline (1250, 2500, 3750, 5000, 6250, 7500, 8750, 10000)

metasys -h

       metasys -a UPS_NAME [OPTIONS]

           Note

           This man page only documents the hardware-specific features of the metasys driver. For information
           about the core driver, see nutupsdrv(8).