foo2ddst-wrapper - Convert Postscript into a DDST printer stream

       Rick Richardson <rick.richardson@comcast.net>
       http://foo2ddst.rkkda.com/

NormalOptions
       These  are  the options used to select the parameters of a print job that are usually controlled on a per
       job basis.

       -dduplex
              Duplex code to send to printer [1].
              │         │               │
              │ 1   off │ 2   long edge │ 3   short edge

       -mmedia
              Media code to send to printer [1].
              ─────────────────────────────
              Media               Code
              ─────────────────────────────
              plain&recycled  1
              paper   2
              thin    3
              thick   4
              recycled        5

       -ppaper
              Paper size code to send to printer [1].
              ┌───────────────────────┬──────────────────┐
              │  1   letter           │  5   A4          │
              │  2   legal            │  6   A5          │
              │  3   executive        │  7   A6          │
              │  4   invoice(5.5x8.5) │  8   B5 JIS      │
              │                       │ 10   16k 197x273 │
              │ 11   16k 184x260      │ 12   16k 195x270 │
              └───────────────────────┴──────────────────┘

       -ncopies
              Number of copies [1].

       -rxresxyres
              Set device resolution in pixels/inch [600x600].

       -ssource
              Source (Input Slot) code to send to printer [7].
              ┌───────────┬────────────┐
              │ 1   upper │ 2   manual │
              └───────────┴────────────┘

       -t     Draft mode.  Every other pixel is white.

       -Tdensity
              Print density (1-5).  The default is 3 (medium).

       -2-3-4-5-6-8-9-10-12-14-15-16-18
              Print in N-up.  Requires the psutils package.

       -oorient
              Orientation used for N-up.
              Portrait    -op   (normal)
              Landscape   -ol   (rotated 90 degrees anticlockwise)
              Seascape    -os   (rotated 90 degrees clockwise)

   PrinterTweakingOptions
       These are the options used to customize the operation of foo2ddst for a particular printer.

       -uxoffxyoff
              Set the offset of the start of the printable region from the upper left corner, in pixels  [varies
              with  paper size].  The defaults should work on the 2200DL and 2300DL, and have not been tested on
              any other printers.

       -lxoffxyoff
              Set the offset of the end of the printable region from the lower right corner, in  pixels  [varies
              with  paper size].  The defaults should work on the 2200DL and 2300DL, and have not been tested on
              any other printers.

       -Lmask
              Send the logical clipping values  from  -u/-l  in  the  ZjStream.   foo2ddst-wrapper  always  runs
              Ghostscript  with the ideal page dimensions, so that the scale of the image is correct, regardless
              whether or not the printer has unprintable regions.  This option is used to move the  position  of
              the  clipped  image back to where it belongs on the page.  The default is to send the amount which
              was clipped by -u and -l, and should be good in most cases.
              0   don't send any logical clipping amounts
              1   only send Y clipping amount
              2   only send X clipping amount
              3   send both X and Y clipping amounts

   DebuggingOptions
       These options are used for debugging foo2ddst and its wrapper.

       -Dlevel
              Set Debug level [0].

foo2ddst-wrapper  is  a Foomatic compatible printer wrapper for the foo2ddst printer driver.  This script
       reads a Postscript ps-file or standard input and converts it to DDST printer format for driving the Ricoh
       Aficio SP 112, the Ricoh Aficio SP 201, and other DDST-based printers.

       This script can be used in a standalone fashion, but is intended to be  called  from  a  printer  spooler
       system which uses the Foomatic printer database.

       Create a monochrome ZjStream from a Postscript document, examine it, and then print it using a RAW  print
       queue:

              foo2ddst-wrapper testpage.ps > testpage.ddst
              ddstdecode < testpage.ddst
              lpr -P raw testpage.ddst

/usr/bin/foo2ddst-wrapper

       foo2ddst-wrapper - Convert Postscript into a DDST printer stream

foo2ddst(1), ddstdecode(1)
       https://github.com/madlynx/ricoh-sp100

foo2ddst-wrapper [options] [ps-file]