foo2ddst - Convert Ghostscript pbmraw into a DDST printer stream

       Rick Richardson <rick.richardson@comcast.net>
       http://foo2ddst.rkkda.com/

NormalOptions
       These  are  the options used to select the parameters of a print job that are usually controlled on a per
       job basis.

       -dduplex
              Duplex code to send to printer [1].
              │         │               │
              │ 1   off │ 2   long edge │ 3   short edge

       -gxpixxypix
              Set page dimensions in pixels [5100x6600].

       -mmedia
              Media code to send to printer [1].
              ──────────────────────────
              Media            Code
              ──────────────────────────
              plain&recycled    1
              paper             2
              thin              3
              thick             4
              recycled          5

       -ppaper
              Paper code to send to printer [1].
              ┌───────────────────────┬──────────────────┐
              │  1   letter           │  5   A4          │
              │  2   legal            │  6   A5          │
              │  3   executive        │  7   A6          │
              │  4   invoice(5.5x8.5) │  8   B5 JIS      │
              │                       │ 10   16k 197x273 │
              │ 11   16k 184x260      │ 12   16k 195x270 │
              └───────────────────────┴──────────────────┘

       -ncopies
              Number of copies [1].

       -rxresxyres
              Set device resolution in pixels/inch [600x600].

       -ssource
              Source (InputSlot) code to send to printer [7].
              ┌────────────┬────────────┐
              │ 1   tray 1 │ 2   manual │
              └────────────┴────────────┘

       -t     Draft mode.  Every other pixel is white.

       -Tdensity
              Print density (1-5).  The default is 3 (medium).

       -Jfilename
              Filename string to send to printer.

       -Uusername
              Username string to send to printer.

   PrinterTweakingOptions
       These are the options used to customize the operation of foo2ddst for a particular printer.

       -uxoffxyoff
              Set the offset of the start of the printable region from the upper left corner, in pixels [0x0].

       -lxoffxyoff
              Set the offset of the end of the printable region from the lower right corner, in pixels [0x0].

       -Lmask
              Send logical clipping amounts implied by -u/-l in the ZjStream [3].
              0   don't send any logical clipping amounts
              1   only send Y clipping amount
              2   only send X clipping amount
              3   send both X and Y clipping amounts

       -A     AllIsBlack: convert C=1,M=1,Y=1 to just K=1.  Works with bitcmyk input only.

       -B     BlackClears: K=1 forces C,M,Y to 0.  Works with bitcmyk input only.

   DebuggingOptions
       These options are used for debugging foo2ddst.

       -Splane
              Output just a single color plane from a color print and print it on the black plane.  The  default
              is to output all color planes.
              1   Cyan
              2   Magenta
              3   Yellow
              4   Black

       -Dlevel
              Set Debug level [0].

foo2ddst converts Ghostscript pbmraw to monochrome DDST streams, for driving the Ricoh Aficio SP 112, the
       Ricoh Aficio SP 201, and other DDST-based printers.

       Create a black and white DDST stream:

              gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE
                  -sPAPERSIZE=letter -r1200x600 -sDEVICE=pbmraw
                  -sOutputFile=- - < testpage.ps
              | foo2ddst -r1200x600 -g10200x6600 -p1 >testpage.zm

/usr/bin/foo2ddst

       foo2ddst - Convert Ghostscript pbmraw into a DDST printer stream

foo2ddst-wrapper(1), ddstdecode(1)
       https://github.com/madlynx/ricoh-sp100

foo2ddst [options] <pbmraw-file >ddst-file